DeoxIT D5 Spray, D-Series
Contact Cleaner & Rejuvenator
Part No.: D5S-6
Container Size: 142 g (5 oz.), adjustable valve (L-M-H)
Unique contact cleaner, rejuvenator, conductivity enhancer and
lubricant. Dissolves oxidation and corrosion on metal surfaces.
Fills in microscopic gaps and reseals surface for better contact to
enhance flow of electricity. Chemically improves metal-to-metal
connections and contacts. Improves connector performance/reliability.
Temperature range: -34 to +200oC.
adjustable valve (L-M-H) - Flushing Action, Safe on Plastics. Read More »
DeoxIT7 D100L concentrate has approximately 20% chemical cleaning action.
Excellent cleaning/deoxidizing, good protection, no ozone depletion.
Improves conductivity and reduces intermittent connections.
Reduces arcing, RFI, wear and abrasion.
Cleaner Audio - Clearer Video - Reliable Data.
5% DeoxIT7 D100L, D-Series
75% Odorless mineral spirits (CAS 64742-88-7)
20% DIFLUOROETHANE (CAS 75-37-6)
Which DeoxIT7 product do I Use:
u Use DeoxIT® D-Series contact cleaner on surfaces that have been in service or have visual signs of oxidation. Contains 20% active cleaner.
u Use DeoxIT® Gold G-Series conditioner on new surfaces, and gold plated surfaces. Ideal for preventing dendrite/fretting corrosion. Protects both surface and base metals. Ideal for critical applications. Contains >1% active cleaner.
u Use DeoxIT® Shield S-Series to protect surfaces from severe environments (humidity, salts, pollutants, sulfur, etc.). Use on clean surface. Contains 0% active cleaner.
continued . . .
Directions for Use:
1. Turn off, unplug the device.
2. Adjust valve (L-M-H). Apply one short burst of DeoxIT7 D-Series contact cleaner to contact/connector surface.
Operate the part/device to help break up oxides and contamination. Wait a few seconds, reapply one short
burst. Wait two minutes before turning on equipment. Test for compatibility before use.
3. In extreme cases (severe oxidation or corrosion), you may need to leave DeoxIT7 on overnight. If that
is necessary; apply, then the following day remove any contaminants lifted by DeoxIT7 with a lint free swab
or cloth on accessible surfaces (If surface is not accessible, repeat step two above.). When surface is clean
(no residue on the swab/cloth), finish with a short burst of DeoxIT7, then remove excess leaving a thin layer.
4. If you notice a green or black coloration on the surface (may take a few days) after applying DeoxIT7,
this indicates dissolved oxidation (surface was severely oxidized). Follow step 2 above one more time.
5. For extended protection: After surface is clean, apply DeoxIT7 Gold G-Series for indoor applications or
DeoxIT7 Shield S-Series for outdoor applications.
6. NOTE: To prevent overspray or spraying in unwanted areas, you can always spray onto a lint-free swab or
cloth first and then using the swab/cloth apply the DeoxIT7 to
Buy Now DeoxIT D5 S-6 Superior Cleaner, Enhancer & Lubricant for Metal Electrical Connections at Musicarte Musical Instruments