Freedom Power has been designed to enclose in a compact format 7 power supply groups isolated from each other,
making it "free" to fuel all your pedal arsenals and effects and make your setup as much as possible
immune from buzzing and background noise.
Groups 1 to 6: The first six groups can deliver each 100mA to 9Vdc and 60 mA 12Vdc (polarity
negative central). When the two outputs are used at the same time, groups 1 to 6 can deliver one
maximum of 100 mA total per group. You then have 12 outputs and the ability to choose whether to use 9Vdc,
12Vdc or both at the same time ... If it's not freedom this !!
When you connect the power cord to your * effect, the corresponding led to the output that
you are going to light up. If you use the 9V output, the green LED will light up, while the 12V LED will light blue,
if you use both of the two group outputs at the same time, you will have both lit leds.
Group7: Group 7 has been designed to feed modern effects systems, which require currents of
higher power than traditional analog pedals.
This group can deliver a current of 450 mA to 9Vdc and 300mA to 12Vdc, the two voltages are selected
by means of special switches:
9VDC @ 450mA: Down selector, when the DC socket is switched on, the green light turns on.
12VDC @ 300mA: selector upwards, when the DC socket is inserted, the blue light turns on.
Buy Now Jump Freedom Pedal Power at Musicarte Musical Instruments
Codice Prodotto (sku): 0121641