DOEPFER Dark Energy II | Synth Stand Alone Monofonico EX DEMO

€ 299,00
Disponibilità Immediata
Ordinalo ora per riceverlo domani!
Ex-Demo Garanzia 24 mesi

DOEPFER Dark Energy II | Synth Stand Alone Monofonico EX DEMO

OTTIME CONDIZIONI - IMBALLO ORIGINALE E ALIMENTATORE INCLUSO

Dark Energy II è un sintetizzatore stand-alone monofonico con interfaccia USB e Midi.

La generazione del suono e tutte le sorgenti di modulazione sono analogiche al 100%, solo l'interfaccia USB / Midi contiene componenti digitali.

Dark Energy è integrato in una robusta custodia in metallo nero con piastre laterali in legno.

Sono utilizzati potenziometri di alta qualità con alberi di metallo e ogni potenziometro - tranne il controllo della modalità filtro - è fissato alla cassa (senza alberi e pomelli traballanti).

La distanza tra i controlli è un po 'più ampia rispetto ai moduli A-100 e vengono usate manopole con look vintage.


VCO
Sawtooth based VCO core
manual tune control (with an internal jumper the range can be set to ~ +/-1 half an octave or ~ +/-2.5 octaves)
range switch -1 / 0 / +1 octave
frequency range about 32 Hz/C0 (reference note and octave switch in position -1) to about 4.2 kHz/C8 (reference note plus 5 octaves and octave switch in position +1)
FM (frequency modulation) control with modulation source switch (LFO1 / off / ADSR)
manual pulsewidth control for rectangle waveform
PWM control with modulation source switch (LFO2 / off / ADSR)
waveform switch (sawtooth / off / clipped/inverted sawtooth)
the sum of the waveform chosen by this switch and the rectangle is fed into the VCF (to turn the rectangle off the PW control has to be set fully CCW)
external CV input for VCO frequency (1V/octave)
external CV input for external PWM of the rectangle
internal CV input for frequency (1V/octave) connected to the CV1 output of the built-in USB/Midi interface
because of the pure analog circuit and the temperature control it may take up to 30 minutes until the VCO is in tune.

VCF
12dB multimode filter with lowpass, notch, highpass and bandpass
mode control for continuous transition from lowpass via notch to highpass and along to bandpass
manual frequency control
tracking switch half - off - full (internally connected to the external frequency CV input of the VCO, i.e. the VCF tracks to the VCO if the switch is set to "half" or "full" position)
exponential frequency modulation control (XFM) with modulation source switch (LFO2 / off / ADSR), the XFM control has polarizer function, i.e. the modulation source (LFO2 or ADSR) selected by the Source switch may affect the filter frequency in a positive (right half of the control range) or negative way (left half of the control range)
manual resonance control (up to self oscillation)
external audio input (this signal is added to the VCO signal)
external CV input for filter frequency
1V/octave tracking for usage of the VCF as a sine wave oscillator over a few octaves (not as precise as the VCO and not temperature compensated, but much better than most of the other filters)

VCA
manual amplitude control (initial gain)
AM (amplitude modulation) control with modulation source switch (LFO1 / off / ADSR)
external CV input for VCA amplitude
exponential scale.

LFO1 and LFO2
manual frequency control
waveform switch (triangle / off / rectangle)
range switch (low, audio, medium)
LED display (dual green/red color for positive/negative share of the signal)
the LFO1 signal is available as an additional socket (to use the LFO1 signal for external modules)
an internal jumper can be used to select between the LFO1 signal or the inverted LFO1 signal

ADSR
manual controls for Attack, Decay, Sustain, Release
range switch (long, short, medium)
blue LED display
ADSR signal is available as an additional socket (to use the ADSR signal for external modules)
External Gate input (normalled via switching contact of the socket to the Gate output of the built-in USB/Midi interface)

USB/Midi-Interface
Midi channel and reference note are adjusted by means of a learn button and LED at the rear panel
The interface generates the gate signal that controls the envelope generator and three analog control voltages: CV1 is used to control the pitch of the VCO, CV2 the VCF frequency (free assignable Midi controller) and CV3 is available as an additional socket at the rear panel (controlled by volume/velocity). It can be patched e.g. to the VCF control input to control the filter via velocity.
CV voltage range 0... +5V (corresponds to 5 octaves)
The threes CVs and the gate signal are also available at the rear panel as jack sockets
cascading of several units via internal Midi Out/Midi In connection, because of shortage of space the unit has no Midi Out socket available this connection has to be established internally, for this the metal case has a hole on both sides so that the Midi Out/In connection can be made via this hole provided that both units are mounted to one another, the Midi Out has Midi Thru function with one exception: the signal does not include the Midi note messages that have been processed already, consequently polyphonic cascading (all daisy-chained Dark Energies on the same Midi channel) or monophonic cascading (different Midi channels) is possible, it's possible to connect only the first unit to USB and pass on the Midi data via the internal Midi link to other devices)
In/Outputs (all monophonic 3.5 mm jack sockets, except USB, Midi and power supply)

front panel:
CV In VCO frequency (1V/oct)
CV In VCO pulsewidth (about 5V range for full scale)
CV In VCF frequency (~ 1V/oct)
CV In VCA amplitude (0...+5V)
Gate In (0/+5...12V)
External Audio In (typ. 1Vss without distortion)
inverted LFO1 Out (~ -2.5 ... +2.5V)
Envelope Out (~ 0 ... +6V)
Audio Out (line output, typ. 1Vss, monophonic)

rear panel:
USB
Midi In
Learn button
Gate Out (with LED for Gate display and learn function), 0/+5V
CV1: controlled by Midi note messages, 1V/Oct, 0...+5V, internally connected to VCO CV input
CV2: controlled by Midi pitch bend, ~ -2.5...+2.5V or ~ 0...+5V (can be selected by an internal jumper), no internal connection, the socket can be patched e.g. to the VCO or VCF CV input at the front panel
CV3: controlled by Midi velocity, 0...+5V, no internal connection, the socket can be patched e.g. to the VCF input at the front panel
CV4: controlled by Midi control change messages, free assignale controller in learn mode, no internal connection, the socket can be patched e.g. to the VCF or VCO pulsewidht input at the front panel
the CV4 socket can be used also as audio output, the function of the socket can be selected by an internal jumper, factory setting is CV4, when changed to audio output no cable at the front panel is required (unless one wants to patch something), in this case CV4 is not available
power supply (12...15V AC, min. 800mA)

internal connections
Midi out (pin header with 2 pins for internal routing of the Midi signal to another Dark Energy)
Midi in (pin header with 2 pins for internal routing of the Midi signal from another Dark Energy)
By means of this internal connections several Dark Energy devices can be daisy-chained. Only the first device has to be connected to the Midi or USB transmitter. For this purpose the side plates of the metal case are equipped with holes that allow the internal connection of 2 or more Dark Energy devices. For this the metal cases have to be mounted directly to each other without wooden sideplate between the units. If a wooden side plate is desired between the devices one has to drill a hole to enable the internal connection.
Several devices can be daisy-chained multiple monophonic (i.e. each Dark Energy received at a different Midi channel) or polyphonic (i.e. all devices are adjusted to the same Midi channel). For polyphonic applications a special stack mode is available. In this mode the device in question does not transmit note messages at the Midi output that are used to generate the tone in the device. Only "unused" note messages are transmitted.

Acquista ora DOEPFER Dark Energy II | Synth Stand Alone Monofonico EX DEMO presso Musicarte Strumenti Musicali

Codice Prodotto (sku): 0127910

Spese di spedizione in Italia

  • GRATIS per tutti gli ordini superiori a 199 €
  • 6,90 Euro Fissi per tutti gli ordini inferiori a 199 €
  • 9,90 Euro Fissi per tutti gli ordini inferiori a 199 € e di peso superiore a 1 Kg

Permuta il tuo usato

Musicarte permuta il tuo usato. Richiedi una valutazione sul tuo prodotto usato per l'acquisto di uno o più prodotti disponibili, anche per ordini online!

SCOPRI ORA

Orari del negozio

  • Lunedì
     15:30 - 19:30
  • Martedì
    10:30 - 13:30
     15:30 - 19:30
  • Mercoledì
    10:30 - 13:30
     15:30 - 19:30
  • Giovedì
    10:30 - 13:30
     15:30 - 19:30
  • Venerdì
    10:30 - 13:30
     15:30 - 19:30
  • Sabato
    10:30 - 13:30
     15:30 - 19:30
  • Domenica
    Chiuso
     

Recapiti e contatti

  • Assistenza Telefonica: (+39) 071 74 50 852
  • Assistenza e-mail: Contatti
  • Tech Support: support@musicartestore.com

Non solo un magazzino

Siamo un vero negozio con più di 1000 mq di esposizione, più di 7000 prodotti disponibili, un online store aperto 24 ore su 24, per un totale di oltre 20.000 prodotti!

Musicarte Store è un negozio di strumenti musicali online. Strumenti musicali nuovi e usati ai prezzi migliori. Chitarre, amplificatori, batterie, tastiere, attrezzatura DJ, Home Recording, spartiti, impianti audio, luci e forniture a negozi. Musicarte è un negozio di strumenti musicali di 1000 metri quadri più lo store online! Tutto quello che cerchi per il musicista che è in te. Tutti i nostri strumenti musicali sono disponibili in pronta consegna, nella maggior parte consegnati in 24 ore. Gli strumenti musicali nuovi sono coperti da una garanzia di ben 3 anni, un anno in più incluso da Musicarte rispetto alla normale Garanzia Italia. Trova subito il tuo strumento preferito!

I marchi principali che trattiamo

Fender - Ibanez - Gibson - Ableton - ADAM - Professional Audio - AKAI - AKG Acoustics - Allen & Heath - Apple - Aquarian - Aquila ART - Artesia - Artnovion - Arturia - Audio Technica

Diverse modalità di acquisto:

Acquista ora i nostri strumenti musicali online spediti con corriere espresso oppure passa in negozio per il ritiro.

OFFERTE USATO
ASPETTA!!
UNISCITI AL MUSICARTE CLUB
RICEVI SCONTI E NOTIZIE
Informativa Privacy
E' GRATIS E PUOI USCIRE IN QUALSIASI MOMENTO