he New Fulltone OCD V2
The OCD has received many slight tweaks over the last 12 years, often incorrectly identified as version 2, Version 3, V4, etc. In reality there has always been only one version Version 1, with very slight variations after that making them V1.1 through V1.7. On 6/15/2017 we released a very new OCD, different enough that it warrants a V2 designation, an explanation and warrants a trip to your favorite dealer to give it another listen. Not a subtle change when turned on not a subtle change when turned off (in E.B. mode).
Sonic changes to OCD V2
NEW FEATURE output buffer (when pedal is turned on in True-Bypass mode, or always when in Enhanced Bypass mode) which eliminates it from being influenced by effects that came after it. Translation, your sound remains consistent regardless of placement in todays more complex signal-chains, loopers, and pedalboards. This buffer also had a positive effect on the sound, it reduced loading on the pedals hard-clipping stage, allowing more sustain of both the sound and the overtones.
NEW FEATURE Class A configured discrete 2N5457 JFET input section, raising the input impedance to 1 mega ohms (previously 330K) and increasing the dynamics resulting in significantly better interaction with both single coil and humbuckers.
NEW FEATURE Internal switch to choose between Enhanced Bypass TM & True-Bypass, and with no popping sound in either mode. No other company offers EB I invented it.
A downside to True-Bypass:
True-Bypass (TB) switching was the ultimate way to achieve a clean signal path for many years. Everythings different now, most guitarists have elaborate pedalboards with 10 or more pedals being the norm, and tremendous potential for signal and tone loss with the many cables, connectors, and other pedals involved in the chain. There can be so much signal loss that it sounds nothing like the sound of a guitar with a cable straight into the front of a great tube amp. Uninspiring.
Whats the pedal industries solution to this problem for the last 40 years?
Unity-gain buffered bypass i.e. a couple of Field effect Transistors (FETs) configured as unity-gain buffers ala Boss, Ibanez, etc, etc.
Whats the benefit to unity-gain FET buffered bypass?
It reduces the loading effect that occurs using long lengths of cable, and you remove the loud popping sound when switching the device on and off.
Whats the issue with unity-gain FET buffered bypass?
Although my ears always told me that it sounded tinny and that there was signal loss, with the help of a my favorite Electronic Engineer (using some very expensive test equipment) we recently documented that each unity-gain FET buffer actually cuts the gain somewhere between 0.3 to 0.6 dB. This loss of gain is in the low-Mids and Bass frequencies, resulting in that tinny sound now that the highs remained and some of the bass and mids are gone. Now factor in that there are two FETs per pedal required to couple the IN & OUT path, thats an obvious loss of between 1dB-2dB per pedal.
Whats an even bigger issue with this old style unity-gain FET bypass?
It kills dynamic pick response, i.e. it kills the difference between picking soft and picking hard Yes, when the pedal is in bypass! This to me is a deal-breaker, and while Ive always felt this to be the case, its great to be able to actually see it on the scope.
Whats the solution?
Enhanced Bypass! Configuring both of the switching FETs Class-A! By configuring a FET for gain (also referred to as wiring it Class-A) all the dynamics return (and then some), even if you only configure it with the slightest amount of gain, in this case: 0.3 to .06 dB.
People rave about old EP-3 Echoplexes and Ep-3 type boosters, and although they know that they love what it does to the guitars sound, they cant explain why. Its because of the Class-A FET preamp! With a Class A FET the dynamics get amplified, allowing an even greater range of expression than if you were playing through a guitar and just one cable straight into your amp. The downside with EP-3 preamps is that they throw the signal OUT-of-phase, boost treble, and cut bass. Fulltones EB the signal exits the pedal IN-phase and doesnt change the EQ at all.
With OCD V2s Enhanced Bypass you get this benefit whether the pedal is turned ON or OFF.
This means that just having the OCD turned off in your signal chain makes the whole rig sound alive, fresh, and more powerful again.
V2 has slightly smaller OCD and Fulltone logos, along with Built in the USA under the Fulltone logo. All Fulltone products are built in the USA, the V2 now says it. Make no mistake, nothing Fulltone is made outside the USA, but please know ALL resistors, knobs, pots, capacitors, switches, etc. for EVERY product in the world are made overseas! And because of that, legally you have to say "Built in USA" instead of "Made in USA."
Next, the IN & OUT jacks are placed exactly at the halfway point of the left & right sides on V2, whereas with all previous versions the jacks were located more towards the bottom.
Looking at the V2 display box you can see the larger decal and addition of With internally selectable True-Bypass or Enhanced Bypass.
The stages added to the circuit changed the OCD, theres no doubt, but it changed for the better. Words some people used to use to describe the OCD: brash,--scooped sounding,--Bassy,--lacks sustain,-- too affected by other pedals .NO LONGER APPLY.
I love Robin Trower, but I get frustrated when I see him play because hes always using a (pre-Full-Drive2) 1992 3-knob Fulldrive that he got new from me back then. How does that help me sell new pedals? Recently I sent a V2 OCD to him. Then I get a call: Mike, this OCD...its unbelievable, I like it better than my #1 vintage Full-Drive! Its not brash like my other OCDs. (ouch) So now Im confused, what does a new OCD have to do with an old Full-Drive? Not much, in my estimation. (Robin continues) It is so natural, full-bodied, and the opposite of brash! Im using it on stage, tonights the second night! Cheers!
Night & Day difference? You be the judge. Again I strongly suggest you try one at your favorite dealer, and then let me know what you think. They are at dealers now.
Acquista ora Fulltone OCD V2 Obsessive Compulsive Drive presso Musicarte Strumenti Musicali
Codice Prodotto (sku): 0121072
Altri prodotti nella categoria Pedali Chitarra Fulltone
Altri prodotti nella categoria Pedali Chitarra
Recensioni dei clienti per Fulltone OCD V2 Obsessive Compulsive Drive
Da Daniele.cinto il 13/11/2017 01:00
Il pedale è di ottimaFattura, ben costruito e solido.Ha volume e gain esagerati e nonostante tutto rimane molto dinamico e silenzioso.Io peró non lo considererei un overdrive, ma un distorsore, anche perche con il gain a zero continua a crunchare il suono e a un quarto è molto presente e caldo. Forse la versione 2.0 ha queste caratteristiche sonore molto moderneche la distinguono dalle versioni precedenti che non ho avuto modo di provare
Da Hazexperience il 11/11/2017 01:00
Forse il miglior overdrive in circolazione
SIMILI A FULLTONE OCD V2 OBSESSIVE COMPULSIVE DRIVE
Siamo un vero negozio con più di 1000 mq di esposizione, più di 7000 prodotti disponibili, un online store aperto 24 ore su 24, per un totale di oltre 20.000 prodotti!
Musicarte Store è un negozio di strumenti musicali online. Strumenti musicali nuovi e usati ai prezzi migliori. Chitarre, amplificatori, batterie, tastiere, attrezzatura DJ, Home Recording, spartiti, impianti audio, luci e forniture a negozi. Musicarte è un negozio di strumenti musicali di 1000 metri quadri più lo store online! Tutto quello che cerchi per il musicista che è in te. Tutti i nostri strumenti musicali sono disponibili in pronta consegna, nella maggior parte consegnati in 24 ore. Gli strumenti musicali nuovi sono coperti da una garanzia di ben 3 anni, un anno in più incluso da Musicarte rispetto alla normale Garanzia Italia. Trova subito il tuo strumento preferito!